Avoir un site web, une chaîne Youtube, une page fan Facebook, c'est bien, mais être vue c'est mieux !

Catalogue All Battery

Catalogue All Battery

Électronique grand public

 Protection Circuit Module (PCB) for 11.1V  Li-Ion 3 Cells Battery Packs 3A Working (11A cut-off)

Protection Circuit Module (PCB) for 11.1V Li-Ion 3 Cells Battery Packs 3A Working (11A cut-off)

Protection Circuit Module (PCB) for 11.1V  Li-Ion 3 Cells Battery Packs 3A Working (11A cut-off)

Protection Circuit Module (PCB) for 11.1V Li-Ion 3 Cells Battery Packs 3A Working (11A cut-off)

Apply for 3 cells Li-ion / Li Polymer battery pack protection Internally trimmed charge and discharge voltage limits Discharge current limit detection Low current standby mode when cells are discharged High quality and high yield100% tested before shipment Adopt Mitsumi MM1414C protection ICConnection Instruction Technical Specifications.style1 {border-collapsecollapse;border1px solid #000000;}.style2 {border1px solid #000000;}.style3 {text-aligncenter;border1px solid #000000;vertical-align:middle;}ItemContentCriteriaOver Charge ProtectionOver Charge Detection Voltage4.35??0.025VOver Charge Release Voltage4.15??0.05VOver Discharge ProtectionOver Discharge Detection Voltage2.4??0.08VOver Discharge Release Voltage3.0??0.15VRated Discharge Current3AOver Current ProtectionOver Current Detection Current11-13ARelease ConditionCut LoadDetection Delay Time5-15msShort Circuit ProtectionShort ProtectionImplementedRelease ConditionCut LoadInterior ResistanceP+, P- Conduction Resistance50-100mCurrent ConsumptionCurrent Consumed in normal Operation35A MaxDimension50 x 16 x 4.1 mmApplication Notes Please use the compatible charger for your battery pack. Pay special attention to your input and output voltage current to avoid PCB damage When mixing over-charged batteries and over-discharged batteries together, PCB will be in dual state of over-charging and over-discharging. In this situation, charging and dis-charging are both disabled Internal static charge protection circuit built into the PCB. However, do not subject the PCB to high static charge to avoid damage Without the written agreement from us, please don't use this PCB for application in medical instruments, emergence devices, auto and airspace vehicles or other device that might have impact on human bodyBecause of the??very high energy density, Li-Ion Battery pack must be connected to a protection circuit module to prevent accidental battery explosion caused by over-charging or over-discharging.


AT: NiMH 18V 4200mAh High Capacity Battery Pack
AT: NiMH 18V 4200mAh High Capacity Battery Pack

AT: NiMH 18V 4200mAh High Capacity Battery Pack

AT: NiMH 18V 4200mAh High Capacity Battery Pack

18 V 4200 mAh NiMH battery packIdeal for DC Power Supply for scooter, robot, E-Bikes and any 18V DC device.Made with 15 4/3 AF (18650)size 4200mAh high capacity NiMH Batteries.Extra battery pack protection with high temperature and high strength PVC wrap Technical Specifications Voltage18VBattery15 NIMH 4/3 AF 4200mAh cellsConnectorno connector, 18AWG 6" bare leads Dimensions95mm x 57mm x 66mm Weight870g.WARNING:Don't subject battery to too high current drain (>10A for continuous use) Internal over-discharging protection can shut down and power. If you can not accept power off in your applications, please don't use this pack Don't connect mutliple these battery packs to increasepack votlage or capacity Don'tmake changes to battey packs and chargers. Any alteration will VOID the warranty from us.


AT: 28.8V 2000mAh NIMH Battery Pack (Custom)
AT: 28.8V 2000mAh NIMH Battery Pack (Custom)

AT: 28.8V 2000mAh NIMH Battery Pack (Custom)

AT: 28.8V 2000mAh NIMH Battery Pack (Custom)

Tenergy high voltage and high capacity 28.8V NIMH 2000mAh rechargeable battery packNIMH Batteries offer memory free operation and you can be charged at any status.Manufactured under ISO9001 and tested based on International Electronic Commission (IEC) standard to ensure capacity, quality and life timeThis is a customized pack. Please contact Cette adresse e-mail est protégée contre les robots spammeurs. Vous devez activer le JavaScript pour la visualiser. if you need this pack. Technical SpecificationsNIMH 28.8 V working voltage. Made by 24 high quality AA 2300 mAh cells in 8 x 8 x 8 configurationDimension:122 mm Length. x42 mm Width x 50 mm Height With bare leads18AWGWeight:Approx. 670gOrdering InstructionThis is a customized pack. Please contact Cette adresse e-mail est protégée contre les robots spammeurs. Vous devez activer le JavaScript pour la visualiser. if you need this pack. Contact us for technical and application discussion.


Tenergy LiPO 7.4V 1600mAh 20C Airsoft Battery Pack
Tenergy LiPO 7.4V 1600mAh 20C Airsoft Battery Pack

Tenergy LiPO 7.4V 1600mAh 20C Airsoft Battery Pack

Tenergy LiPO 7.4V 1600mAh 20C Airsoft Battery Pack

Li-Polymer batteries are the newest available batteries for airsoft and other hobby toys. They are designed as a light weight, high output power source. This 7.4v Li-Po battery can deliver more power than 12v Ni-MH large type battery with only half of the size and a third of the battery cells. High capacity1600mah Mini Tamiya connectorDimension87mm x 35mm x 14mm Weight95gNotePlease read instructions before using!


AT: Tenergy 9.6V 16Ah LiFePO4 Battery Pack with PCB (DGR-A)
AT: Tenergy 9.6V 16Ah LiFePO4 Battery Pack with PCB (DGR-A)

AT: Tenergy 9.6V 16Ah LiFePO4 Battery Pack with PCB (DGR-A)

AT: Tenergy 9.6V 16Ah LiFePO4 Battery Pack with PCB (DGR-A)

ATTenergy 9.6V 16Ah LiFePO4 Battery Pack with PCB Built with 6 pieces 3.2V 8Ah LiFePO4 (Lithium Iron Phosphate) Rechargeable Battery More capacity per gram, meaning longer duration between charges. Almost no ''self discharge'', so it is always ready to go even weeks after charging. Faster charge timeSpecifications2P3S configuration Nominal Voltage9.6V Capacity16000 mAh Maximum Discharge Rate2C Maximum Charge Current16A Maximum Burst Current48A ConnectorNo Connector, Bare Leads Dimension243 x 82 x 47 mm Weight1510gCautionThis pack is LiFePO4 chemistry. Only charge them on quality chargers which have a dedicated charge routine for LifePO4 cells. NEVER attempt to charge damaged packs.Read all cautions on product packaging before using these packs.


10pcs Intellect 2/3A 1600mAh NiMH Rechargeable Batteries w/ Tabs
10pcs Intellect 2/3A 1600mAh NiMH Rechargeable Batteries w/ Tabs

10pcs Intellect 2/3A 1600mAh NiMH Rechargeable Batteries w/ Tabs

10pcs Intellect 2/3A 1600mAh NiMH Rechargeable Batteries w/ Tabs

High quality Intellect 2/3 A size 1.2 V, 1600 mAh rechargeable Nickel Metal Hydride (Ni-MH) battery with tabs.Make your own battery pack in any combination of shape and voltage with easy soldering.Ideally suitable for making mini battery packs for remote controlled (RC) aircraft.Ultra high capacity, 40% more running time than Ni-Cd battery.Very long cycle life and Rapid battery charge up.Significant savings (60 % or more) from any retail stores.Technical SpecificationsDimensionHeight 28 mm, Diameter 17 mmWeight0.8 Oz. or 24gCapacity1600 mAhVoltage1.2V Download product data sheet here.


10pcs Tenergy 2/3A 1600mAh NiMH Rechargeable Batteries w/ Tabs
10pcs Tenergy 2/3A 1600mAh NiMH Rechargeable Batteries w/ Tabs

10pcs Tenergy 2/3A 1600mAh NiMH Rechargeable Batteries w/ Tabs

10pcs Tenergy 2/3A 1600mAh NiMH Rechargeable Batteries w/ Tabs

High quality 2/3 A size 1.2 V, 1600 mAh rechargeable Nickel Metal Hydride (Ni-MH) batteryHigh capacity (1600 mAh) and high discharge rate (9C-12C) for super performanceMake your own battery pack in any combination of shape and voltage with easy solderingIdeally suitable for making mini battery packs for remote controlled (RC) aircraft.Ultra high capacity, 40% more running time than Ni-Cd battery.Very long cycle life and Rapid battery charge upSignificant savings (60 % or more) from any retail stores.Battery tested based on International Electronic Commission (IEC) standard to ensure capacity, quality and life time.6 months warranty. Technical SpecificationsDimensionHeight 28 mm, Diameter 17 mmWeight24gCapacity1600 mAhVoltage1.2VStandard Charge15 hours @ 100 mARapid Charge1.2 hours @ 1000 mA


Tenergy 22.2V 2500mAh 25C 6 Cell LIPO Battery Pack w/ 7 Pins Balancing Connector
Tenergy 22.2V 2500mAh 25C 6 Cell LIPO Battery Pack w/ 7 Pins Balancing Connector

Tenergy 22.2V 2500mAh 25C 6 Cell LIPO Battery Pack w/ 7 Pins Balancing Connector

Tenergy 22.2V 2500mAh 25C 6 Cell LIPO Battery Pack w/ 7 Pins Balancing Connector

Rated Maximum Continuous Discharge25C (62.5 Amps)Rated Maximum Burst Discharge50C (125 Amps) for 5 SecsRecommended Charging Current1C (2.5 Amps or less)Dimension135 x 43 x 31.5 mmWeight13.9oz / 395gDischarge Wire12Awg silicon wire, no connector.Balancing taps20Awg super flexible silicon wire, 7 pins JST type 6S balancing tap NotePlease read instructions before using!


Tenergy T-3000 AA/AAA NiMH/NiCd USB Micro Battery Charger T
energy T-3000 AA/AAA NiMH/NiCd USB Micro Battery Charger

Tenergy T-3000 AA/AAA NiMH/NiCd USB Micro Battery Charger

Tenergy T-3000 AA/AAA NiMH/NiCd USB Micro Battery Charger

Ultra compact and light.Easy to use.Recharge 2 pieces of AA/AAA Ni-MH rechargeable batteries via laptop/PC or any power supplies with an USB outlet.As an emergency charger - power up your digital devices by 2 AA/AAA Ni-MH rechargeable batteries or 2 AA/AAA Alkaline batteries. Dual color indicator. Includes charging tips for Nokia, Sony Ericsson, Samsung, LG and Motorola.Recharge your 2 AA or AAA Ni-MH rechargeable batteries via an USB outlet.Power up your digital devices with 2 AA or AAA batteries. Charging Time Size Charging Current Ni-MHCharging Time AA 180mA2100mAh12 hours AA 180mA2300mAh 13 hours AA 180mA2500mAh 14 hours AAA 180mA800mAh 5 hours AAA 180mA1000mAh6 hoursSpecifications:Input5V DC 500mA (via an USB outlet)Output5V DC 300mA (USB outlet)Charging current for AA/AAA Ni-MH batteries180mA Download product manual here. All brand names are registered trademarks of their respective owners. *Free Shipping Promotion only applies to domestic US addresses.


Li-Polymer 3.7V 2400mAh (3568100) Battery - UL Listed
Li-Polymer 3.7V 2400mAh (3568100) Battery - UL Listed

Li-Polymer 3.7V 2400mAh (3568100) Battery - UL Listed

Li-Polymer 3.7V 2400mAh (3568100) Battery - UL Listed

Polymer Li-Ion Battery, 3.7V, 2400mAh Battery Chemistry Polymer Li-Ion Electrical 3.7V, 2400mAh Model 3568100 Continuous discharge current 480mAh Max Dis-Charging current 2400mAh Cycle Life Up to 500 Times Weight 50g Dimension 100 mm x 68 mm x 3.5 mm CAUTIONwhen working with Li-ion cells, they are very sensitive to charging characteristics and may explode if mis-handled. User should have enough knowledge on Li-Ion rechargeable batteries in charging, discharging and assembly before use.We are not responsible for any damage caused by misuse or mishandling of these Li-Ion batteries. Download product data sheet here.


12 Pcs Tenergy Propel CR123A Lithium Battery with PTC Protected
12 Pcs Tenergy Propel CR123A Lithium Battery with PTC Protected

12 Pcs Tenergy Propel CR123A Lithium Battery with PTC Protected

12 Pcs Tenergy Propel CR123A Lithium Battery with PTC Protected

Tenergy Propel CR123A with UL-Listed and UN-DOT Approval The Tenergy CR123A 3V non-rechargeable lithium battery is one the most popular, widely used and tested CR123A lithium batteries on the market. The high capacity Tenergy CR123A is designed to deliver long run times in every device that it powers whether it is an LED or incandescent flashlight, a camera, or a high tech gadget. Independent tests have shown Tenergy CR123A batteries excel in higher drain devices and often outperform the 'big name' cells in those types of devices. CR123A batteries power many flashlights and optical devices from companies like Inova, Streamlight, Surefire, Fenix, and many more!Every Tenergy CR123A battery incorporates PTC protection and the PTC threshold is set at 5AMPS. The protected Tenergy CR123A batteries prevent excessive discharge that can damage lithium cells and may lead to catastrophic incidents.Tenergy CR123A batteries are also available in double and triple shrink wrapped sets. The double and triple sets of CR123A batteries are produced in the same production lot and the internal resistance of the batteries is matched. The double and triple Tenergy CR123A battery sets will prevent new and old batteries from being mixed up and used in the same device and are also remarkably convenient making battery changes easier than ever. The sets eliminate the chance of dropping a single cell in the dark.This is the world famous Tenergy CR123A LITHIUM BATTERY. Offering Stunning Power Performance & Affordable Pricing the Tenergy CR123A has quickly become one of the most well regarded CR123A made. Consistently rated as a Consumers Top Pick for a CR123A the Tenergy CR123A has raised the bar on value and quality of CR123A Lithium Batteries. High power CR123A Lithium Batteries. Can be used for many applicationsPhoto cameras, Flashlights, light meters, and many other photo equipments. Ultra high energy density and lasts 3-5 times longer than ordinary alkaline batteries in high current drain devices like digital cameras. Fast Flash performance with a consistent and very short recycle time. This highly performance CR123A can replace the following modelsCR123, DL123A, K123A, EL123AP, VL123A, 5018LC, and CR17345. UL listed and Passed UN transportation tests T1-T8.UL # MH48285WarningCan Not Be Recharged! Technical SpecificationsVoltage 3V Normal Capacity 1400 mAh Self-discharge Rate <1% per Year Max. Constant Current 1500mAh Max Pulse Current 3000mAh Normal Weight 16 g Operating Temperature -20 C ~ 60 C PTC High Current Discharge Protection 5AMP Download Specification Data Sheet


Conversion Cable from 2-Hole Female Connector to 2 Clips
Conversion Cable from 2-Hole Female Connector to 2 Clips

Conversion Cable from 2-Hole Female Connector to 2 Clips

Conversion Cable from 2-Hole Female Connector to 2 Clips

2-Hole universal female connector to two clipsWith 12", 20AWG wire for extension.Connecting to 2-pin connectors and wires


Conversion Cable from Bare leads to 2 Pin Adaptor
Conversion Cable from Bare leads to 2 Pin Adaptor

Conversion Cable from Bare leads to 2 Pin Adaptor

Conversion Cable from Bare leads to 2 Pin Adaptor

Bare leads to Male two pin universal connector Using the adapter, you can use Tenergy universal smart charger to charge Li-ion or NiMH battery pack with two pin femal Universal connectors The length is 11.5", 18AWG wire with the connectors.


2.8
2.8" (70mm) Shrink Wrap Tube

2.8

2.8" (70mm) Shrink Wrap Tube

The price is per unit foot. Ideal PVC shrink wraps for building your own battery packs Fits battery cells of A size and larger Fits Sub-C (Sc) cells soldered end-to-end.Operational Guide Use the following formula to select your PVC wrap:PVC Width > = ( the circumference of your pack ) / 2 + 5 mm Unit conversion1 mil = 0.001 inch Technical Specification Width3 InchThickness5 milShrink Ratio:Cross Sectional45% - 53%longitudinal12% - 18%


3.15
3.15" (80mm) Shrink Wrap Tube

3.15

3.15" (80mm) Shrink Wrap Tube

The price is per unit foot.Ideal PVC shrink wraps for building your own battery packsFits battery cells of A size and largerFits Sub-C (Sc) cells soldered end-to-end.Operational GuideUse the following formula to select your PVC wrap PVC Width > = ( the circumference of your pack ) / 2 + 5 mmUnit conversion1 mil = 0.001 inch Technical SpecificationWidth3.15 Inch Thickness5 mil Shrink RatioCross Sectional45% - 53% longitudinal12% - 18%


Cell Spy lipo voltage tester (2S to 6S)
Cell Spy lipo voltage tester (2S to 6S)

Cell Spy lipo voltage tester (2S to 6S)

Cell Spy lipo voltage tester (2S to 6S)

The Cell Spy makes checking the voltage of your lipo packs easier than ever.It provides a digital read-out that can show up to 6 cell voltages in rotation.With 2.5mm pin spacing, it works with 95% of the lipos on the market.Dimension49mm x 20mm x 10mm


11.1v 3S 2200mAh 15C LIPO Battery Pack + Balance Connector (#80044) - #SC (Clearance)
11.1v 3S 2200mAh 15C LIPO Battery Pack + Balance Connector (#80044) - #SC (Clearance)

11.1v 3S 2200mAh 15C LIPO Battery Pack + Balance Connector (#80044) - #SC (Clearance)

11.1v 3S 2200mAh 15C LIPO Battery Pack + Balance Connector (#80044) - #SC (Clearance)

.r1 {color#900;}.r1 strong {font-weightnormal;}.I2 {font-styleitalic;}For RC Helicopters & AirsoftBattery comes with TP 4-Pin to Align/Eflite/G2Plus 3S 4-Pin Adapter (Part # 80044), which will allow this battery pack to balance with Balance Chargers that are currently on the market.This specific battery pack works well for Airsoft guns that has space in the battery compartment for it.*RecommendedMeasure and make sure this battery pack does fit in your Airsoft Gun before purchasing.Dimensions are 105mm (L) x 35mm (W) x 24mm (T). 3 cell Li-Polymer 2150mAh battery pack. 15C continuous discharge rate of 31 amps with 42 amp bursts in accordance withour "Real Flight Rating" method.Maximum charge rate 2.1 Amps. With Thonder Power Balance Connecor Dimensions105mm (L) x 35mm (W) x 24mm (T) Dimensions in Inches4.13in (L) x 1.363in (W) x 0.92in (T) Weight156 grams This pack is ideal for the T-Rex helicopter.


Tenergy Propel 7.2V 4200mAh Flat NiMH Battery Packs w/ Tamiya
Tenergy Propel 7.2V 4200mAh Flat NiMH Battery Packs w/ Tamiya

Tenergy Propel 7.2V 4200mAh Flat NiMH Battery Packs w/ Tamiya

Tenergy Propel 7.2V 4200mAh Flat NiMH Battery Packs w/ Tamiya

For Serious Competition Purpose Specifications:Tenergy Sub C 4200mAh Propel Model--Beat or match IB PacksMinimum Capacity4000mAhNumber of Cells6xSub C / 7.2V 4200mAhContinuous Discharge Rate10C ( 42Amps)Bust Rate20C (84Amps)Suggested Charge Rate6 AmpsActual Resistance1.5-1.7 mili-Ohm/cell Dimension136mm x 47mm x 24mm Weight420gTypical Application Data:Discharge Rate30 Amps Runtime:535+ Sec Cut-off Voltage.90Average Voltage at 330Sec 1.22+This pack works excellent in the following RC vehicles:Traxxas Stampede Associated RC10 B4 Losi XXX BK2 Yokomo MR-4TC Duratrax Evader BXTraxxas Rustler Associated RC10 T4 Losi XXX-4 GT Yokomo D1 Duratrax Evader TX Traxxas 4-Tec Associated TC4 Losi XXX-T MF2 Yokomo FC3SHPI Pro 4 Traxxas Bandit Associated RC10 L40 Losi JRXS Yokomo FD3S HPI Sprin Traxxas Spirit Associated RC10 L30 Losi XXX-S Yokomo FR34 XRAY T1FK05 Traxxas Street Sport Associated RC12 L30Yokomo AE86 Tamiya TLT-1 Traxxas SRT Yokomo S15Yokomo YRX-12 MORE...


11.1 volt 8000mAh 15C LiPoly Lipo 3 Cell Battery Pack
11.1 volt 8000mAh 15C LiPoly Lipo 3 Cell Battery Pack

11.1 volt 8000mAh 15C LiPoly Lipo 3 Cell Battery Pack

11.1 volt 8000mAh 15C LiPoly Lipo 3 Cell Battery Pack

Continuous Discharge Rate15C / 120A Burst Discharge Rate20 C / 160A Discharge (Output) Leads16 AWG silicon wire,95 mm long Maximum charge rate 8 Amps. Charging (Balancing) Lead:JST/Align/E-Flite connector. 24AWG PVC wire, 60mm Long Dimension:166 x58 x26 mm Weight580gRecommend to use Cell Shield for 2-6 Series connected packs or LiPo Shield for 1-12 series connected packs to prevent the packs from over discharge. A group of paralleled cells can be treated as one single cell. NotePlease read instructions before using!


AT: Tenergy Li-Ion 18650 11.1V 6600mAh PCB Protected Rechargeable Battery Pack w/ 18AWG Bare Leads
AT: Tenergy Li-Ion 18650 11.1V 6600mAh PCB Protected Rechargeable Battery Pack w/ 18AWG Bare Leads

AT: Tenergy Li-Ion 18650 11.1V 6600mAh PCB Protected Rechargeable Battery Pack w/ 18AWG Bare Leads

AT: Tenergy Li-Ion 18650 11.1V 6600mAh PCB Protected Rechargeable Battery Pack w/ 18AWG Bare Leads

High quality 11.1 V Li-Ion rechargeable battery packMade of9pcs 2200mAh cylindrical 18650 cells with PCB and poly switch for full protectionLight weight and higher energy density than other rechargeable batteryNo memory effect and rechargeableLonger storage life than NiMH batteryBuilt-in IC chip will prevent battery pack fromover charge and over discharge and prolongs battery lifeIdeal for replacing batteries for 12V HID (10 to 13W) and Diving Lights for long running timePerfect for for RC toy, lighting, robots,and DVD external battery. Recommend Smart Universal Li-ion Battery charger for proper chargingTechnical SpecificationsCapacity 6600mAh Voltage 10.8V (Peak at 12.6V, avg. at 11.1V) Dimensions 73mm height x 166.5mm width x 19mm thickness Weight 15 oz Max. charge current 1C Max. discharge current 2C Cut off voltage over-charge protection13V over-Discharge protection7.2V CautionsCAUTIONwhen working with Li-ion cells, they are very sensitive to charging characteristics and may explode if mis-handled.User should have enough knowledge on Li-Ion rechargeable batteries in charging, discharging and assembly before use.We are not responsible for any damage caused by misuse or mishandling of these Li-Ion batteriesStrongly suggestthat youuse our smart Li-Ion battery charger to recharge the battery packNever use conventional DC adapter to charge the battery module) We are NOT responsible for any damage that is caused by the misuse of the Li-Ion BatteryPlease don't make parallel connection with more thanthree modules to avoid uneven charge.Download product data sheet here.


AT: 24V 10000mAh Rectangular Nimh  Battery Pack w/ 2 sets Bare Leads For DC Power
AT: 24V 10000mAh Rectangular Nimh Battery Pack w/ 2 sets Bare Leads For DC Power

AT: 24V 10000mAh Rectangular Nimh  Battery Pack w/ 2 sets Bare Leads For DC Power

AT: 24V 10000mAh Rectangular Nimh Battery Pack w/ 2 sets Bare Leads For DC Power

24V 10000 mAh Nimh battery packIdeal for DC Power Supply for Solar Panel, robot, E-Bikes and any 24V DC device with less than 10A discharging current requirementMade with 20D size 10000 mAh TENERGY high power Nimh BatteriesExtra battery pack protection with high temperature and high strength PVC wrapTechnical Specifications Voltage24V BatteryNimhConnector Type18Awg Bare LeadsDimensionsHeight 2.375"; Width 3.5"; Length 9"Battery Configuration7x6x7Weight6.8 Lb.


AT: Tenergy Li-Ion 18650 11.1V 7800mAh Side-by-Side PCB Protected Rechargeable Battery Pack w/ Bare Leads
AT: Tenergy Li-Ion 18650 11.1V 7800mAh Side-by-Side PCB Protected Rechargeable Battery Pack w/ Bare Leads

AT: Tenergy Li-Ion 18650 11.1V 7800mAh Side-by-Side PCB Protected Rechargeable Battery Pack w/ Bare Leads

AT: Tenergy Li-Ion 18650 11.1V 7800mAh Side-by-Side PCB Protected Rechargeable Battery Pack w/ Bare Leads

High quality 11.1 V Li-Ion rechargeable battery packMade of9pcs 2600mAh cylindrical 18650 cells with PCB and poly switch for full protectionLight weight and higher energy density than other rechargeable batteryNo memory effect and rechargeableLonger storage life than NiMH batteryBuilt-in IC chip will prevent battery pack fromover charge and over discharge and prolongs battery lifeIdeal for replacing batteries for 12V HID (10 to 13W) and Diving Lights for long running timePerfect for for RC toy, lighting, robots,and DVD external battery. Recommend Smart Universal Li-ion Battery charger for proper chargingTechnical SpecificationsCapacity 7800mAh Voltage 10.8V (Peak at 12.6V, avg. at 11.1V) Dimensions 69mm height x 170mm width x 20mm thickness Weight 15oz Max. charge current 2 PCB PCB for 11.1V Li-Ion Battery Pack (3 cells with 15A limit ) Max. discharge current 15A Cut off voltage over-charge protection13V over-Discharge protection7.2V CautionsCAUTIONwhen working with Li-ion cells, they are very sensitive to charging characteristics and may explode if mis-handled.User should have enough knowledge on Li-Ion rechargeable batteries in charging, discharging and assembly before use.We are not responsible for any damage caused by misuse or mishandling of these Li-Ion batteriesStrongly suggestthat youuse our smart Li-Ion battery charger to recharge the battery packNever use conventional DC adapter to charge the battery module) We are NOT responsible for any damage that is caused by the misuse of the Li-Ion BatteryPlease don't make parallel connection with more thanthree modules to avoid uneven charge.


Male Hitec connector with 22 AWG wire -Battery Side
Male Hitec connector with 22 AWG wire -Battery Side

Male Hitec connector with 22 AWG wire -Battery Side

Male Hitec connector with 22 AWG wire -Battery Side

High quality Hitec Male connectorGolden plated to ensure very good contact.190mm 22 Gauge PVC wireWith pre-coated soldering for easy solderingMust have for making your customized battery packs for RCAirtronic and Hitec etc


Protection Circuit Module For 8 Cells LiFePO4 Battery Pack 15A Working (30A cut-off)
Protection Circuit Module For 8 Cells LiFePO4 Battery Pack 15A Working (30A cut-off)

Protection Circuit Module For 8 Cells LiFePO4 Battery Pack 15A Working (30A cut-off)

Protection Circuit Module For 8 Cells LiFePO4 Battery Pack 15A Working (30A cut-off)

Untitled DocumentSpecifications of 8 Series LiFePO4 Batteries Charge & Discharge Guard ShieldApplication:The product could be widely used in the fields of electric vehicles, standby power supply and power supply of military equipment, etc.Main Functions:The product has 5 main functionsover charge, over discharge, over current, short circuits and balancing. Function of over charge protectiononce voltage of any battery in the group gets higher than the over charge protection point, charge cuts off to ensure all batteries work within the over charge protection point. Function of over dischargeonce voltage of any battery in the group gets lower than the over charge protection point, discharge cuts off to ensure all batteries work beyond the over charge protection point. Function of over currentduring the discharge process of battery group, once discharge current gets over the set over current protection point, output cuts off to ensure battery group works within the safe limit of current. Function of short circuit protectiononce battery groups output port appears the condition of short circuit, it cuts off to ensure battery group not to be damaged because of short circuit. Function of voltage balancingin the late charging period of battery group, voltage difference that appears during the using process of each battery could get balancing revised to ensure battery groups capacitance.Specified TypesYS80301 Technical Index Item 8series balancing guard shieldOvercharge protection (V)3.95??0.025 Overcharge recovery (V)3.80??0.05 Overdischarge voltage (V)2.2??0.1 Overdischarge recovery (V)Cutload or chargeNormalworking current (A)15Overcurrent protection (A)30Internalresistance ??(??m/ohm)<30Chargingbalancing current (mA)60Chargingbalancing voltage (V)3.63??0.03 Overcharge postpone time (mS)1.2Overdischarge postpone time (mS)144Temperatureprotection ( )65 (option)Temperaturecharacteristic??1.0mv/Workingtemperature????????( )-10~+60Storagetemperature??????????( )-30~+85Powerloss (uA)<400 (Vn=3.2v normal)<200 (Vn2.2v??Under-voltage) Dimensions (mm)79 x 48 x 7Weight(gram)26 Download Installation guide here.Usage and Attention After purchasing the protection mould, users should connect lines in compliance with the instruction. Voltage usually exists in the battery, so operators should peel one line and then connect another starting from B-. Lines should be connected from the low position to the high position with no mistake of order, or the irreparable damage could be caused. When lines get connected, bits of copper and tin should not cling to the guard shield. Protection board should be connected to battery group with compliance to specifications and any leading line should not be put on the back of the board but on the lateral side. When equipping the guard shield, hard epoxy sheer should be fixed on the back of the board as the barrier to prevent the squeezing against short circuit. When welding ou


Sur votre téléphone

Download Full Premium themes - Chech Here

София Дървен материал цени

Online bookmaker Romenia bet365.ro